How to Select a Fridge: Advice and Opinion of Experts

Could you imagine a modern home without a fridge? Probably not! This type of household appliance is as important as, for example, a mobile phone or computer. How to choose the best refrigerator for the house so that it is economical, not too large, and satisfies everyone in the house? Our article will help answer this question based on the advice and opinions of experts. So how to select a fridge?

How to Select a Fridge: what characteristics to consider

A fridge belongs to those purchases that are selected meticulously. After all, this equipment should serve for many years, and it is usually bought for at least 10-15 years. More expensive models can even be selected for 20 years. Therefore, it is very important to consider all parameters when buying. However, there cannot be a universal approach to assessing the quality of refrigerators. Even a super expensive model breaks after 5-6 years and is often beyond repair. However, most of the models still can be fixed if you invite professionals from https://fixappliances.ca/toronto-appliance-repair/. Now, let’s look at the main characteristics to consider:

1. Size and dimensions

Even in a small kitchen, the fridge does not have to occupy the entire useful area. Its door should open freely, without catching on the kitchen furniture and without resting on the corners. It is also important that the refrigerator is located at some distance from the kitchen stove and heating system batteries and that the power cord reaches the outlet without an extension cord. Attention! Before buying a full-sized fridge, measure all the door openings, as it may not pass through the door. A refrigerator with a volume of 180 to 250 liters is enough for a single person. A family of 4 will be completely satisfied with a fridge with a capacity of 350 liters. A large family will need a larger refrigerator of 500 liters or more. 

2. Cameras and doors

In simple models, there is usually only one door, behind which there is a small freezer compartment and a small fridge. Such models are optimal for the office. Two-door refrigerators are considered the most popular among consumers. In addition to the main compartment, they are complemented by a freezer located in the upper part and equipped with one or several drawers. The side-by-side models are characterized by a slightly different arrangement: the freezer compartment is made on the side or at the bottom. 

3. Defrosting

Modern models of appliances are equipped with a very useful “no frost” function. This is an automatic defrosting system. Models equipped with this system do not require the owner to remove ice stuck to the walls periodically. Instead, the system itself changes the mode of operation, and the collected condensate accumulates in a container above the compressor. Subsequently, it is removed by evaporation. However, refrigerators without the no frost system are still produced. Such models belong to the cheap segment.

4. Compressors

Most fridges are equipped with one compressor. Such models are cheaper and consume much less energy. However, refrigerators with two or more compressors were developed into serial production. According to studies, such models will last longer and work better due to the fact that each compressor withstands less load. In addition, the compressors are able to work independently of each other.

5. Energy efficiency

Depending on the energy used for work, all refrigerators are assigned energy efficiency classes. They are designated by Latin letters from A to G. At the beginning of 2003, manufacturers decided to add two more to the seven existing classes: A + and A ++. As you may have guessed, the units labeled A +++ are the most economical. The class is determined by a rather complicated formula, where the number of available chambers, the temperature, and the application of various innovations are considered. 

6. Climatic class

There are only 4 of them:

● N – refrigerating equipment of this class is designed for operation at +16-32 degrees;

● SN – subnormal class, works at +10-32 degrees;

● ST – subtropical class, the optimal temperature for work is +18-38 degrees;

● T – tropical class, works at +18-43 degrees.

Choose the one that is optimal for your family. You can determine the freezer class by looking at the technical data sheet.

In addition to the fairly common “no frost” system, many models have several other very convenient functions. For example, turbo-cooling contributes to the fastest possible cooling of recently brought products. Or the Fuzzy Logic system, which detects the presence of an insufficiently cooled product. A flow of cold air is directed to it for cooling. Most refrigerators, even budget models, are equipped with sound or visual alarms. Undoubtedly, the abundance of these functions only complicates the choice of a refrigerator. But if you understand what you want for your house – the choice will be easy. We hope that now, after reading the this article, the answer for “how to select a fridge” is almost answered.